Steel tape shield silicone rubber Frequency cable BPGGP2 Application scope:

The frequency conversion cable is mainly used for the connection between the frequency conversion power supply and the frequency conversion motor, as well as the transmission and distribution lines with rated voltage of 1kV and below, for the transmission of electric energy. It is especially suitable for papermaking, metallurgy, metal processing, mining, railway and food processing industries.

Steel tape shield silicone rubber Frequency cable BPGGP2 Usage characteristics:

1. Rated voltage of Jiao current: U0 / u 0.6/1kv

Working temperature: low temperature of silicone rubber insulation - 55 high temperature + 180 ℃

2. The temperature of cable installation and laying shall not be lower than - 25 ℃.

3. Allowable bending radius of cable: minimum 10 times of cable outer diameter

Steel tape shield silicone rubber Frequency cable BPGGP2 structure:

(1) Conductor: multi stranded fine round copper wire is used as the composite round conductor, and its composition and appearance shall conform to the requirements of annealed soft copper conductor for category 5 electrical engineering in GB/T3956 standard.

(2) Insulation: high temperature resistant material silicone rubber shall be used for insulation, which shall conform to relevant national standards or industrial standards.The average thickness of insulation shall not be less than the nominal value, and the thickness of Zui thin point shall not be less than 90% 0.1mm of the nominal value.

(3) Cable forming: the cable forming adopts 3 + 3 structure, the three intermediate wires shall be in the gap between the two main lines, the cable structure shall be round, and the non round degree shall be less than 10%, and halogen-free flame-retardant filling and wrapping materials shall be used.

(4) Inner liner: the inner liner is wrapped,

(5) Composite tape shielding: copper plastic composite tape + drainage wire.The overlapping rate of copper plastic composite tape shall not be less than 15%.(the supplier can provide other shielding methods in accordance with Article 10 of GB / T 12706.2-2008).

(6) Outer sheath: silicon rubber sheath flame-retardant sheath material is used. The nominal thickness shall be in accordance with the provisions of GB / t12706.1-2008. The thickness of Zui thin spot shall not be less than 80% 0.1mm of the nominal value.

(7) Appearance identification: the sheath surface of the finished cable shall be provided with continuous marks of the manufacturer, cable model, rated voltage, meter mark, production year and batch number. The marks shall be legible, easy to identify and resistant to rubbing.

BPGGP2Variable frequency cableSpecification selection from AnHui TianKang