silicon rubber frequency conversion cable is suitable for AC rated voltage 0.6/1kv and below frequency conversion control system as power supply cable or electrical connection. The product has voltage shock resistance, can withstand the pulse voltage during frequency conversion, and the silicon rubber cable has good shielding, and can eliminate electromagnetic interference, reduce the noise of frequency conversion motor, and the system operates stably.Used in metallurgy, electric power, petrochemical and other industries.
1、silicon rubber frequency conversion cable executive standard
Q/HHTZH006: fire resistance and fire resistance test shall be carried out in accordance with GB12666-90 standard
2, silicon rubber frequency conversion cable application characteristics;
1. AC rated voltage: U0 / u 0.6/1kv maximum working temperature: silicone rubber insulation 180 ℃ .
2. The temperature of cable installation and laying shall not be lower than - 25 ℃.
3. Allowable bending radius of cable: Cable less than 10 times of cable outer diameter
3,basic model and name table 1
Model |
Name |
BPGGP |
Silicon rubber insulated and sheathed copper wire braided shield high temperature resistant variable frequency power cable. |
BPGGP2 |
Silicon rubber insulated and sheathed copper tape wrapped shield high temperature resistant variable frequency power cable. |
BPGGPP2 |
Silicon rubber insulated and sheathed copper wire braided copper tape wrapped shield high temperature resistant variable frequency power cable. |
BPGGP3 |
Silicon rubber insulated and sheathed aluminum polyester composite film wrapped shield high temperature resistant variable frequency power cable. |
BPGVFP |
Silicon rubber insulated NBR sheathed copper wire braided shield high temperature resistant variable frequency power cable. |
BPGVFP2 |
Silicon rubber insulated NBR sheathed copper tape wrapped shield high temperature resistant variable frequency power cable. |
BPGVFPP2 |
Silicon rubber insulated nitrile sheathed copper wire braided copper tape wrapped shield high temperature resistant variable frequency power cable. |
BPGVFP3 |
Silicon rubber insulated NBR sheathed aluminum polyester composite film wrapped shield high temperature resistant frequency conversion power cable. |
Note: tinning can be used for copper wire in conductor core, Zr shall be added in front of flame-retardant cable model, and R shall be added for soft structure cable.
4: Code name and meaning
Table 2
Code name |
Code meaning |
BP |
Frequency conversion power cable |
Copper conductor |
ellipsis |
G |
Silicone rubber insulation or sheath |
F |
F46 insulation or sheath |
V |
PVC insulation or sheath |
YJ |
XLPE insulation |
VF |
Nitrile sheath |
P (P1) |
Copper braid shield (tinned braid shield) |
P2 |
Copper tape wrapped shield |
P3 |
Aluminum polyester composite film wrapped shield |
PP2 |
Copper wire braided copper tape wrapped shield |
silicon rubber frequency conversion cable Main indicators
1. DC resistance of finished cable conductor (in accordance with GB3956)
2.The insulation resistance of finished cable (20 ℃) fluoroplastic and silicone rubber insulation shall not be less than 100m Ω km.PVC insulation shall not be less than 50 m Ω km.
3. the finished cable shall not be broken down after AC 50Hz 3.5kv/5min voltage test.
4. shield transmission impedance
The transmission impedance of the cable is equal to or less than 100 Ω/m at 100MHz.
Contact: Mr Li
Phone: +86-18226665885
Tel: +86-0550-7788337
Email: sales@tksiliconerubbercable.com
Add: No.20# RenHe South Road,TianChang,AnHui Province,China